三本精密電子趙SM様 お世話になっております＠オーディオテクニカの清水

Three precision electronics.Mr. Zhao SM We are indebted to @ is a Audio-Technica Shimizu.I restock items currently conducts the review, but no J100iS # 13. Will contact the validation results for PP products separately, followed by the reported one. 1. We are occasionally are shown in the attached photo is dropped from the blister.→ It seems fit enough not fall drop tests be conducted properly pushing at what is occurring.2. Due to fall off even if pushing controller & Rch housing dropped in again.-> Please verify all cavity. Recommended by normal /i/iS.3. Using the blister iS, even though I model there is. (With photo) → management of packing materials and QC check should make sure.4. There are surface mount at J100BK. → are stuck in the Groove of the mount. In working notes and QC checks please.5. WH code parts are pink. (With photo) → Rch line sheath inside the coating colors they have, not uniform is dirty.6. Will still only J100BK in 15 pcs 2 PCs easily strayed housing. (Normal # 9, # 14) -> Welding is incomplete. I/iS, performs a welding wear check measurement after another please use welding machine reconditioning.7. Deco (interior painted parts) occurs the wound. → NG level is obvious. (iS # 14) Property inspection, our measurement measure available, contact the theWith only the exterior surface, in which becomes LOT-OUT.So still have time until the MP to ensure coordination and education. Best regards.

Three precision electronic
Zhao SM like we are indebted @ The Shimizu of Audio-Technica. We go now to check the other day stock goods, but, there was no # 13 of J100iS. We will separately contact with respect to the verification results of PP goods, but, prior to will some reports. 1. Those that are dropped from the blister will have been scattered as the attached photo. → those that do not even fall out of implementing the drop test by pushing neat is, it seems a fitting has occurred because of insufficient. 2. There are also those that deviate by falling crowded press controller and Rch housing is again among those dropped. → please check of all cavities. Please carried out at normal / i / iS. 3. Despite I model, there are things you are using a blister of iS. (Photo attached) ￫ please go firmly on the management and QC check of the packaging material. 4. There are things that have lifted the mount in J100BK. → I have caught in the groove part of the mount. Please confirm in the work attention and QC. 5. With respect to WH code, there is a thing that is in some places pink. (Photo attached) ￫ but it seems also the color of the coating of the sheath inside of Rch line, is dirty not uniform. 6. Only still J100BK but, 2pcs is I have easy housing is disengaged in 15pcs. (Normal 9 #, # 14) ￫ welding is incomplete. For I / iS, but do the welding confirmation after the measurement, please re-adjustment of a separate welding machine. 7. Scratch has occurred to Deco (internal paint parts). → it is clearly NG level. (IS # 14) with respect to the property inspection, but will contact you separately your our measurement environment is measured as soon as free, even just appearance surface, this will end up with the LOT-OUT. Since there is still some time to MP, Please execute the adjustment and education. Thank you.

Precision electronic booksMr. Zhao SM@ Shimizu Audio-Technica is a pleasure to work with you.The other day, and I have now confirmed receipts, did not have the J 100 iS 13.The verification result of the PP products will inform separately, we advance some reports.1 and there are eliminated from the blister in the attached photos.Do not drop or fall to properly test in the insufficient insertion has been generated.That Rch ﾊｳｼﾞﾝｸﾞ ｺﾝﾄﾛｰﾗ inside and out, but he pushed again fall off from what they have.Go to all of the cavity. In a normal wish I iS.3. In spite of the I model, using iS blister. (photo attached)The packing material to make the management and QC.In J 100 BK mount is rising.To take part in the groove of the base. In QC work and attention, please.5 on WH code, there are places in pink. (photo attached)It seems that Rch line of internal sheath color, uniform coating is not dirty.6 is still only J 100, BK come off easily ﾊｳｼﾞﾝｸﾞ 2 pcs in 15 PCs. (9 and 14 normal.Welding, which is incomplete. On the measurement and I iS after welding is confirmed, please separate the readjustment of the welding machine.(7 Deco internal parts is damage occurs.To reveal the NG level. (iS 14)On the characteristics of inspection and measurement measured separately as soon as our environment, contactThis is only the appearance, but in the LOT -- and OUT.There is still time to MP, implementation and adjustment.Please help me.