Results (
English) 1:
[Copy]Copied!
Color beads large chunks through the heat. Presented in a medium grind until such as plastic resin.Small particles of color and a color cube The tiny particles are Herpes Simplex from the smallest which has the size and shape of each color pigment, only that specific conditions under. Color Group (Aggregate) consists of particles starting with the relation of the islands face big and tight, it is difficult to place a different default, small particle.Color cube (Agglomerate) is caused by a combination of particles and color Group (Aggregate) together make a square corner. The color cube is small particles of color groups easier.The explosion in the second stage (Secondary dispersion). When the molten plastic is similar to the behaviour of liquids that have a viscosity. Viscosity of plastics depends on temperature. When temperatures increase viscosity is reduced and when the temperature decreases. Viscosity increases.Plastic Injection molding machine in fusion, rotation resistance of screw and plastic injection mould of plastic screws into the fusion with the extreme viscosity will cause more resistance melted plastic with less viscosity.Once the temperature of the machine. Plastic viscosity is reduced to make any resistance to screw it to my sister.Plastic Masterbatches distributed well in mixed colours should be required:1. Masterbatches must have a melting point is lower than the melting point of the plastic to mix colors.2. the molten Masterbatches must have a low viscosity to be spread around the PCs.Plastic to mix colors. We need to control the melting point and viscosity of masterbatches are carefully. Viscosity of plastics can Melt Flow index using a verification Tester.Factors in distributionThe most important variables for which the distribution is to shear, which occurs in the fluid systems (plastic fusion) is a Laminar Flow. The model of shear shown by assuming 1 deck out cards card voltage plate on the forward. Card sheet on top to move faster than the tile sheet lang. The difference of the speed at which this is happening due to shear.
Being translated, please wait..