絲素蛋白粉末回溶方法：1.取燒杯盛裝60ml的二次水後，加入1克的絲素

絲素蛋白粉末回溶方法：1.取燒杯盛裝60ml的二次水後，加入1克的絲素蛋白粉末。2.緩慢進行攪拌約3-5分鐘，確定粉末均溶解於二次水中(建議可使用刮勺或旋轉盤攪拌) 。3.濾除表面泡沫(建議可使用篩網過濾，或是離心機離心2,500轉、5分鐘取上清液) 。4.淡黃色澄清液體，即為「絲素蛋白水溶液」。

Results (English) 1:

DISSOLVING fibroin powder Method:
1. Take the second beaker containing 60ml of water, the silk fibroin powder was added 1 gram.
2. slowly stirred for about 3-5 minutes, is determined in the secondary powder was dissolved in water (may be recommended using a spatula or stirring disc rotation).
3. The surface of the foam was filtered off (using a mesh filter may be recommended, or centrifuge 2,500 rpm for 5 minutes the supernatant).
4. yellowish clear liquid, is the "silk fibroin solution."

Results (English) 2:

Silk protein powder back-soluble method:
1. After taking the beaker and serving 60 ml of secondary water, add 1 gram of silk protein powder.
2. Stir slowly for about 3-5 minutes to make sure that the powder is dissolved in secondary water (it is recommended to use a spatula or rotary disc to stir).
3. Filter out surface foam (it is recommended to use a screen filter, or centrifuge centrifugation 2,500 rpm, 5 minutes to remove the liquid).
4. Pale yellow clarifies the liquid, that is, "silk protein aqueous solution".

Results (English) 3:

Silk fibroin powder dissolution method:
1. Take a beaker to contain 60ml of secondary water and add 1g silk fibroin powder.
2. Mix slowly for about 3-5 minutes to make sure that the powder is dissolved in the secondary water (it is recommended to use a spatula or a rotating disk for mixing).
3. remove the surface froth (it is recommended to use sieve filtration, centrifuge centrifugation 2500, and 5 minutes to take supernatant).
4. The light yellow clear liquid is silk fibroin aqueous solution.