组装后STOPPER/MIC缝隙在0.2MM，HOUSING/UNIT

组装后STOPPER/MIC缝隙在0.2MM，HOUSING/UNIT HOLDER与ORANMENT缝隙在0.1MM以内可接受，反之NG；若超出范围，不影响使用，视具体情况可接受，反之NG。

Results (English) 1:

STOPPER/MIC gap in 0.2MM,HOUSING/UNIT after Assembly HOLDER ORANMENT gaps within 0.1MM are acceptable, whereas NG if out of range, does not affect the use, as the case may be accepted, but NG.

Results (English) 2:

After assembly STOPPER / MIC gap 0.2MM, HOUSING / UNIT HOLDER AND ORANMENT gap within 0.1MM acceptable, whereas NG; if out of range does not affect the use, depending on the specific circumstances acceptable, whereas NG.

Results (English) 3:

After assembling the STOPPER/MIC gap in HOUSING/UNIT, HOLDER 0.2MM and ORANMENT gap in 0.1MM can be accepted, and NG; if beyond the scope, does not affect the use, depending on the situation can be accepted, and NG.