下の赤字部分が回答です。現在アラームも異常のメッセージが何も出ないため

下の赤字部分が回答です。
現在アラームも異常のメッセージが何も出ないためタイシーメンスエンジニアも解らないという事で帰りました。


ビーム駆動以外は正常な様です。
ビーム駆動のスイッチを押すと１番インバーターも表示は、P009から0表示に変わり、回る反応はしているようですがスタートしません。


スペアの１番インバーターが悪いのか？PLCのどれかのスイッチが悪いのか聞いてください。

Results (English) 1:

Answer is highlighted in red below.In taissy Siemens engineers don't know for current alarm no error messages are returned.Beam-driven than is healthy.Beam-driven switch No.1 inverter also shows P009 0 display changes from the reaction around seems to have will not start.Spare 1 inverter is bad? Ask the PLC or switch is bad.

Results (English) 2:

Deficit portion of the lower is the answer.
Alarm current abnormality of the message was back at things that do not know even Thailand Siemens engineers because they do not leave anything. Except beam drive looks like this is normal. When you press the switch of the beam driving the No. 1 inverter also display is changed to 0 view from P009, it seems to be the reaction that turns but does not start. Or spare No. 1 inverter is wrong? Please ask any one of the switches of the PLC is wrong.

Results (English) 3:

Part of the answer is that the deficit down.It is now back in alarm of abnormal message that nothing Thailand Engineer for Siemens and do not understand.Except for the normal driving beam.The first inverter drive switch of the press beam and P 0 009, from the change in the reaction starting around like that.A spare inverter ill? Ask any of the PLC switch?