记忆椅位的设置：A）按“设置”键5秒后，蜂鸣器发出“嘀”的一声，同时设

记忆椅位的设置：
A）按“设置”键5秒后，蜂鸣器发出“嘀”的一声，同时设置键指示灯亮，表明进入普通设置状态；
B）点按“医生选择”键，根据旁边的指示灯“A”、“B”、“C”，选择相应的医生地址，把将要设置的记忆椅位储存于该医生地址下；
C）通过主控面板、副控面板或脚踏开关上的控制键（即牙椅上升、牙椅下降、靠背上升、靠背上升），调整牙科椅到医生理想位置，点按“P1”键；再次调整牙科椅的位置，点按“P2”键；第三次调整牙科椅的位置，点按“P3”键。
D）再点按“设置”键，蜂鸣器发出“嘀”声，同时设置灯熄灭，表示该该医生地址下的3个记忆椅位“P1”、“P2”和“P3”已被储存，同时退出普通设置。

Results (English) 1:

Memory seat settings:A), press the "set" button after 5 seconds, the buzzer sounded a "beep" sound, set both the key light is on, indicating that in ordinary settings;B) click the "doctors" button under the led next to the "a", "b", "c", select the appropriate doctor address and chairs stored in the memory to be set under the address of a doctor;C) through main control panel, and Deputy Control Panel or foot switch Shang of control key (that teeth Chair rose, and teeth Chair declined, and back rose, and back rose), adjustment dental chair to doctor ideal location, points by "P1" key; again adjustment dental chair of location, points by "P2" key; third times adjustment dental chair of location, points by "P3" key.D) then click the "set" button, the buzzer sounded a "beep" sound, setting the lights that represents the address of the doctor's memories 3 chairs "P1" and "P2" and "P3" are stored, while exit General settings.

Results (English) 2:

Setting memory chair position:
the A) according to the "Settings" button for 5 seconds after the buzzer "beep" is heard, and set the key indicator light, indicating common set into the state;
B) Tap "Doctor Select" key, according to light next to "a", "B", "C", select the appropriate address doctors, the chair will be set memory bits stored Dr. Yu Xiagai address;
C) through the main panel, control panel or foot switch Vice control key on (ie dental chair rise, dental chair down backrest rise back rise), adjust the dental chair to the doctor's ideal location, click the "P1" button; adjust again the dental chair position, click the "P2" button; third adjustment dental chair position, tap "P3" key.
D) and then click the "Settings" button, the buzzer "beep" sound, and set the lights off, the three bits of the memory of the Doctor chair addresses under "P1", "P2" and "P3" has been saved and exit general settings.

Results (English) 3:

Memory chair position setting:A) press "set" button 5 seconds, the buzzer issued a "beep" sound, while the key indicator light is set to enter the common state;B) click the "doctor" key, according to the next to the light "A", "B", "C", select the appropriate doctor address, the memory will be set up in the memory of the doctor;C) by controlling the key main control panel, control panel or foot switch on (i.e., chair rise, rise, decline, the chair backrest back to the doctor, rose) to adjust the dental chair ideal position, click the "P1" button; re adjust the dental chair position, click the "P2" button; third adjust the dental chair position, click the "P3" button.D) and then click "Settings" button, the buzzer beep, and set the lights off, the doctor said the address of the 3 memory chair "P1", "P2" and "P3" has been stored, and the exit of ordinary settings.