Установка осуществляется только чер

Установка осуществляется только через стоковое Recovery!


Подготовительный этап:
1. Заряжаем устройство (Lenovo P70-A) минимум на 75%.
2. Скачиваем архивы с драйвером (Прикрепленный файл LenovoUsbDriver_1.0.18.zip 9,37МБ 187 раз скачан) и с обновлением ПО (далее update.zip) на ваш ПК.
3. Производим установку драйверов на ваш ПК, для этого дважды кликните левой кнопкой мыши по, предварительно извлеченному из архива, файлу LenovoUsbDriver_1.0.18.exe.
4. Включенный смартфон подключаете к ПК при помощи usb-кабеля.
5. На смартфоне в параметрах usb-подключения выберите режим подключения: Медиа-устройства (МРТ) (см. видео №1).
Видео №1
Производим копирование update.zip (архив должен быть именно с таким именем!) с ПК в корневой каталог внутренней памяти смартфона.
(см. видео №2).
Видео №2
Вход в режим Recovery и установка update.zip:
1. Отключите смартфон от usb-кабеля и выключите его.
2. На выключенном смартфоне зажмите кнопку увеличения громкости и не отпуская ее произведите включение устройства.
3. На экране вашего смартфона должно появиться меню с тремя вариантами дальнейшей загрузки (см. рис.1).
Рисунок 1
4. Перейдите к пункту Recovery используя кнопку увеличения громкости и осуществите его выбор нажав на кнопку уменьшения громкости (см. рис.2).
Рисунок 2
5. После этого устройство загрузится в режим Recovery, выбираем английский язык (см. рис.3).
Важное замечание: В режиме Recovery работает сенсорное управление устройством (TouchScreen)!!!
Рисунок 3
6. После выбора английского языка мы попадаем в главное меню режима Recovery(см. рис.4).
Рисунок 4
7. Выбираем пункт "install update package" (см. рис.5).
Рисунок 5
8. Запускаем процесс обновление ПО вашего смартфона, нажав на пункт "Yes" (см. рис.6).
Рисунок 6
9. Дождитесь окончания процесса обновление ПО (см. рис.7).
Рисунок 7
10. После успешного завершения процесса обновления ПО вы увидите надпись "congratulate you to install success" и для перезагрузки в Android OS выберите пункт "restart system" (см. рис.8).
Рисунок 8

Results (English) 1:

Installation is carried out only through waste Recovery! Preparatory stage:1. Charge the device (Lenovo P70-A) at least 75%.2. download the driver files (attached file LenovoUsbDriver_1.0.18.zip 9, 37 MB 187 times downloaded) and updating the software (update.zip) to your PC.3. Produce installing the drivers on your PC, to do this, double click with the left mouse button on the previously extracted from an archive file LenovoUsbDriver_1.0.18.exe.4. Smartphone connect to PC using the usb cable.5. On your phone in the usb connection settings, select the connection mode: media devices (MRI) (see video # 1). Video # 1Produce copy update.zip (archive must be exactly the same name!) from your PC to the root directory of the internal memory of the device.(see video # 2). Video # 2Entrance to the Recovery mode and install update.zip:1. unplug the Smartphone from the usb cable and turn it off.2. On the Smartphone is switched off, hold the volume up button and without releasing it make activate the device for calls.3. On the screen of your Smartphone's menu should appear with three options for further loading (see fig. 1). Figure 14. Navigate to Recovery using the volume up button and then select it by pressing the volume down button (see fig. 2). Figure 25. The device will boot into Recovery mode, choose English (see fig. 3). Important note: in the mode of Recovery works touch TouchScreen device! Figure 36. After selecting English we get into Recovery mode main menu (see fig. 4). Figure 47. Select "install update package" (see fig. 5). Figure 58. run the update process on your Smartphone by clicking on item "Yes" (see fig. 6). Figure 69. Wait for the update process (see fig. 7). Figure 710. After you successfully complete the upgrade process on you will see the inscription "congratulate you to install success" and to restart the Android OS, select "restart system" (see fig. 8). Figure 8

Results (English) 2:

Installation is carried out only through the stock Recovery! Preparatory stage: 1. Charger (Lenovo P70-A) at least 75%. 2. Download the archive with the driver (Attachment LenovoUsbDriver_1.0.18.zip 9,37MB downloaded 187 times) and updates (hereinafter update.zip) on your PC. 3. You are installing the driver on your PC, by double clicking the left mouse button, a pre-extracted from the archive file LenovoUsbDriver_1.0.18.exe. 4. Included smartphone connect to a PC via usb-cable. 5. In the smartphone the parameters usb-connection, select the connection mode: Media device (MRI) (see. №1 video). Video №1 produce up update.zip (archive must be exactly of the same name!) From the PC to the root of the internal memory smartphone. (See. Video №2). Video №2 Enters Recovery program and install update.zip: 1. Disconnect your smartphone from the usb-cable, and turn it off. 2. On the smartphone is turned off, hold the volume up button and hold it make a turn on the device. 3. On the screen of your smartphone should appear menu with three options for further load (see. Figure 1). Figure 1 4. Scroll to Recovery using the volume up button and carry out his choice by pressing the volume down button (see. Figure 2). Figure 2 5. The device boot mode Recovery, choose English (see. Figure 3). Important note: In Recovery works touch control device (TouchScreen) !!! Figure 3 6. After you select the English language we get to the main menu Recovery (see. Figure 4). Figure 4 7. Select the point "install update package" (see. Figure 5). Figure 5 8. Start the process of updating software for your smartphone by clicking on the item "Yes" (see. Figure 6). Figure 6 9. Wait for the update process (see. Figure 7). Figure 7 10. After the successful completion of the update, you see the words "congratulate you to install success" and reboot into Android OS, select "restart system" (see. Figure 8). Figure 8

Results (English) 3:

installation is carried out only through the стоковое recovery.



the preparatory stage: 1. charging device (lenovo P70 - a) at least 75%.
2. downloading files with driver (the attachment LenovoUsbDriver _ 1.0.18.zip 937мб 187 times downloaded) and update (hereinafter update.zip) on your pc.
3. manufacturing installation of drivers on your pc, so double click with the left mouse button on the previously can be drawn from the archive file LenovoUsbDriver _ 1.0.18.exe.
4.the inserted a plug to a pc using the usb cable.
5. for smartphone in the parameters of the usb connections, select the connection mode, the media device (mri) (see para. video 1)
1
produce video copying update.zip (file must be named.) with the pc in the root directory of the internal memory smartphone.
(see para. video 2) 2
.
video entry in the recovery and installation of update.zip:
1. shut off the phone from the usb cable and turn it off.
2.on the smartphone clamp button to increase volume and not letting her make the device.
3. on the screen of your smartphone should appear a menu with three options (see further loading. fig 1).figure 1
4. click the button to increase item recovery using volume and realize his choice by clicking on the button for volume (see para. figure 2 figure 2
.
5. after that, the running mode of recovery.choose the english language (see para. рис.3).
the remark: in the mode of recovery work sensor device management (TouchScreen). !! figure 3
6
. after a choice of english, we go to the main menu of recovery (see para. figure 4).figure 4
7. select "install update package" (see para. picture 5).

8 figure 5. run the update on your smartphone by clicking on the "yes" (see para. figure 6 рис.6).

9. wait for the update process (see para. рис.7).

10 shown in figure 7.after the successful completion of the update to see the "congratulate you to install success" and to reload in the android os, select "restart system" (see para. рис.8
in figure 8).