Only provide descriptions of meteo

Only provide descriptions of meteorological characteristics relevant to the project and/or
calculations related to the EIA (air temperature, humidity, wind speed, direction and frequency of
wind, sun and radiation, the amount of rainfall, storm, and other abnormal meteorological
conditions). Indicate the length of data chains as well as which data sources and documents
were used or referred to.
2.1.3. Hydrographic and marine conditions
Only provide descriptions of hydrographic and marine characteristics relevant to the project
and/or calculations related to the EIA (the level of water, volume of water flow, water speed, and
other hydrographic and marine conditions). Indicate the length of data chains, as well as which data
sources and documents were used or referred to.
2.1.4. Current state of natural environment
Only provide indications and descriptions of environmental factors likely to be directly
impacted by the project, such as the atmosphere, which may directly receive air waste
emission from the project (attention should be paid to areas located near the project in the
main wind direction), as well as water sources that may receive waste water directly from the
project, and land, sediment, and biological systems that will be directly impacted by wastes or
other factors of the project.
For air, water, land, and sediment impacts, it is necessary to note that
- measuring, sampling and analyzing shall comply with the procedures and regulations of
environmental monitoring and analysis and that the results shall be accomplished and confirmed
by functional bodies under the law;
- clear instructions for collecting and analyzing data as part of the EIA should be supplied
(location of measurements and samples must be coded, showing time and location; data
must be presented in tables and charts, and also illustrated with diagrams of sampling
locations); and
- remarks on the pollution level of air, water, soil, and sediment in comparison to environmental
technical standards and norms should be included. Remarks on causes and sources of pollution
should be made. If an environmental database is available, it should be used for preliminary
assessments of the carrying capacity of the project site in accordance with environmental technical
standards and norms.

Results (Vietnamese) 2:

Ch
tính toán liên quan
gió, m
đ Cho bi
đ
2.1.3. Th
Ch
và / ho
đ Cho bi
ngu
2.1.4. Hi
Ch
b
phát th
h
d
các y
Đố
-
tr
b
-
(
ph
đị và
-
tiêu chu Nh
nên N
đ
tiêu chu