PhoenixCard 使用指南Sam2012-02-01 目录1.

PhoenixCard 使用指南
Sam
2012-02-01
目录
1. 软件运行 .....................................................................................................................................3
2. 软件说明 .....................................................................................................................................3
2.1.简介 ....................................................................................................................................3
2.2.软件界面 ............................................................................................................................3
3. 烧写卡的操作 .............................................................................................................................5
4. 恢复格式化卡的操作..................................................................................................................7
1. 软件运行
运行可执行文件 PhoenixCard.exe ，
2. 软件说明
2.1.简介
PhoenixCard 软件用于将待量产的固件通过 SD 卡读卡器写入 SD 卡中。
用户可以选择不同的模式将SD卡烧写成量产模式或者是启动模式，烧写完
成后可以用烧写好的 SD 卡来进行设备量产或者启动。
2.2.软件界面
PhoenixCard 软件界面如下
1）．
鼠标单击该按钮软件自动搜索出读卡器的盘符。（可能有多个）
2）．
存在多个移动存储设备的情况下，选择读卡器的盘符。（建议烧卡的时候只插入一个设
备， 不要插入其他移动存储设备，以免因误操作而导致数据破坏）
3）．
鼠标单击该按钮弹出 img 文件选择对话框，用户可以选择需要烧写的固件文件。
4）．烧写模式
选择“卡量产”烧写用于量产的 SD 卡；
选择“卡启动”烧写用于启动的 SD 卡，选择“用户数据”选项，将数据烧写到启动卡
的用户数据分区中以便在小机上访问这些数据。
5).
鼠标单击该按钮开始进行卡的烧写，烧写过程不要做其他操作。（会清除卡上的数据，操
作前请备份卡上的重要数据）
6）．
鼠标单击该按钮将恢复卡格式化为普通的卡。（一般不使用，但是会清除卡上的数据，
操作 前请备份卡上的重要数据）
7）．
鼠标单击该按钮清除信息列表中的信息。
8）．
鼠标单击该按钮打开帮助文档。
9）．
鼠标单击该按钮软件退出
10）．提示信息列表
烧卡期间的提示信息。
3. 烧写卡的操作
步骤如下：
第一步：运行 phoenixcard
第二步：插入带 SD 卡的读卡器
第三步：点击 按钮
第四步：在 选择组合框选择读卡器对应的盘符
第五步：点击 文件选择按钮选择 image 文件。
第六步：选择所需要的烧写模式 ，选择“卡启
动”并勾选“启动数据”时会弹出数据路径选择对话框，并在后面显示数据路径，
如需修改数据路径，点击 修改路径。
第六步：点击
烧写的提示信息会显示在中间提示信息列表
典型界面信息如下：
4. 恢复格式化卡的操作
步骤如下：
第一步：运行 phoenixcard
第二步：插入带 SD 卡的读卡器
第三步：点击 按钮
第四步：在 选择组合框选择读卡器对应的盘符
第五步：点击 按钮进行恢复格式化操作
第六步: 拔出卡

Results (English) 1:

PhoenixCard user Guide Sam The year 2012-02-01 Directory 1. software running .................................. .................................................. ................................................. 3 2. Software Description .............................................. .................................................. ..................................... 3 2.1 Introduction ......... .................................................. .................................................. ....................... 3 2.2. Software Interface ...................... .................................................. .................................................. .. 3 3. The programming card operations ........................................ .................................................. ................................... 5 4. Restore format the card operation ...... .................................................. .................................................. ........ 7 Software operation 1. Run the Executable File, PhoenixCard.exe, 2. Software Description 2.1. Introduction PhoenixCard Software for firmware to be in Mass Production by SD Card Reader Writer SD Card. Users select Different CAN mode SD Card burnt into Production mode or Start mode, Burns wrote Cheng Hou Burning SD Card CAN be Used for device Mass Production or Started. 2.2. Software interface PhoenixCard Software interface are as Follows 1). Mouse Click the button Software Automatically searches out Reader's Letter. (May be More than one) 2). There is More than one storage Case of Removable Devices, select the Card Reader drive. (Recommended When Burn Cards insert only one , Do not insert any other Removable storage device, so as to Avoid Data corruption Due to misoperation) 3). Mouse Click on the button to eject the IMG File Selection Dialog Box, select the firmware CAN Users File to download. 4). Programming mode Select "Mass Production" Programming for Volume Production of the SD Card; Select "activate" Programming to Start the SD Card, select the "user Data" option, to download Data to Start . The user Data Partition to Access the Data on the Small Machine . 5) Mouse Click on the Start button to the Burning, Burning Process not to do other Operations. (Clears the Data on the Card, Before you Backup Important Data on the Card) 6). Mouse-Click this button to Restore the Card formatted as General. (Usually not Used, BUT Will Clear the Data on the Card, Before you back up the Important Data on the Card) 7). Mouse-Click this button to Clear the information in the List. 8). Mouse-Click this button to Open the Help File. 9) . Mouse Software Click the button to Exit 10). Message List Messages During the Burn Card. 3. download Card Operations Steps are as Follows: First step: run phoenixcard Step Two: insert the SD Card Reader Step Three: Click on the button Fourth step: select Combo Box to select the drive Card Reader Fifth step: Click the File Selection button to select the Image File. The sixth step: select the Programming mode, select "Card set "And Check the" Launch Data "When Will pop up the Data path Selection Dialog Box, and display the Data in the back path, If you need to modify the Data path, Click Change path. The sixth step: Click Download Prompts Will be displayed in the message List Typical interface information is as Follows: 4. Recovery-formatted Card Operations Steps are as Follows: First step: run phoenixcard Step Two: insert the SD Card Reader Step Three: Click on the button Fourth step: select Combo Box to select the drive Card Reader Fifth step: Click on the Restore button format The sixth step: unplug the Card

Results (English) 2:

PhoenixCard Guide
Sam
2012-02-01
Contents
1. Software running ..................................... .................................................. .............................................. 3
2. Software Description ................................................. .................................................. .................................. 3
2.1 Introduction ........... .. ................................................ .. ................................................ .. ................... 3
2.2. The Software interface ......................... .................................................. ................................................. 3
3. The programming card operations .......................................... .. ................................................ .. ............................... 5
4. Restore formatted Card Operations ........ .... .............................................. .... .............................................. .... .. 7
1 Software runs
PhoenixCard.exe run the Executable File,
2. the Software
2.1 Introduction
PhoenixCard Software Will be Used for the Production of firmware via SD Card Reader write to the SD Card.
The user CAN select a mode Different Will Burn SD Card Written Production mode or Start-up mode, Burn Finish
after a good SD Card CAN be Programmed to Carry the device or to Start Mass Production.
2.2. The Software interface
Software interface is as Follows PhoenixCard
1).
Click the button Software Automatically search out the Letter of the Reader. (There May be More than one)
2).
The Presence of a Plurality of Removable storage Devices, select the Reader Letter. (Recommended Burn Card is inserted only When a set up
Equipment, do not insert other Removable storage device, to Avoid Data corruption Due to mistaken Operations)
3).
Click the button to pop up img File Selection Dialog Box, select the required Programmed Users CAN firmware File.
4). Programming mode
select "Card Production" Programming for Mass Production of SD Card;
select "Card Startup" Programming for Starting the SD Card, select "user Data" option, the Data Programmed into the Start Card
. user to Access the Data Partition Data on a Small Machine
5)
Click the button to Start Programming the Card, the Programming Process do not do other Operations. (Clears the Data on the Card, the operation
before making your Important Data backed up on the Card)
6).
Click the button to Restore the Card is formatted as a normal Card . (GeneRally not Used, BUT it Will ERASE on the Data Card,
back up Important Data before operating on the Card)
. 7).
Click the button to the message Clear List information.
8).
Click the button to Open the Help File .
. 9)
Click the Exit button Software
. 10) List of Messages
prompt Burn Card period.
3. The Programming Card operation
Steps are as Follows:
Step one: Run phoenixcard
Step Two: Insert the SD Card Reader
Step 3: Click the button
Step four: in the Choice of the Combo Box to select the Corresponding Letter Reader
Step Five: Click the File Select button to select the Image File.
Select the Desired Programming mode, select "Card Kai: The sixth step
Will pop up move "and tick "Data" is the Data path Selection Dialog, and Displays the Data path in the back,
To modify the Data path, Click Edit Path.
Step Six: Click the
Writer's message Will be displayed in the Middle of a message List
Typical interface information is as Follows:
4. Recover formatted Card operation
Steps are as Follows:
Step one: Run phoenixcard
Step Two: Insert the SD Card Reader device
Step 3: Click the button
Step 4: Select the Combo Box to select the Corresponding Letter Reader
Step Five : Click the button to resume format operation
Step Six: Pull out the Card

Results (English) 3:

PhoenixCard using the Guide
Sam
2012-02-01
1., running, running, running ..., ... ,,,. 3
2.1., ... ,,,,,,. 3
2. ,,,. .. ,,, ..., ... ... ,,, ,,,,,, .......................... .............................. 3
2.2. Software interface..5
4..3
3. the operation of Writing Card Printing the card for the operation of the format card printing and writing card printing operation on ... ::::::::: ,,,,,,, writing, writing ,,,,, writing, writing ,,,, , writing, writing, ...