吸塑正面发白（装机部分不允许发白）面积在0.2m㎡以内，目视不明显，同

吸塑正面发白（装机部分不允许发白）面积在0.2m㎡以内，目视不明显，同一面不超过两处，且相邻两处相距在10.0CM以上可接收（AC），反之拒收（RE）。

Results (English) 1:

Plastic front white (installed capacity does not allow white) within the area of 0.2m square meters, visually inconspicuous, with not more than two, and the distance between two adjacent 10.0CM can receive (AC), whereas rejection (RE).

Results (English) 2:

White plastic front (installed part allowed white) area within 0.2m㎡, visually obvious, with one side not more than two, and the adjacent two or more apart in 10.0CM receivable (AC), on the contrary refuse receiving (RE).

Results (English) 3:

Blister positive white (installed in part does not allow white area in less than 0.2m square meters, visual is not obvious, with the side of not more than two and two adjacent apart in more than 10.0CM receives (AC), otherwise reject (RE).