Hiện tại, thực tế thi công tại công

Hiện tại, thực tế thi công tại công trường gặp nhiều khó khăn do lồng thép cột, vách, lõi thang vướng với thanh la của cốp pha nhôm. Gây ảnh hưởng tiến độ thực hiện dự án. Vì vậy BCH CT yêu cầu QHP phối hợp hổ trợ:
- Thép chủ lồng thép sẽ thực hiện né la theo bản vẽ mặt bằng bố trí la (đã gửi cho QHP vào ngày 11/10/2016) → Vấn đề này QHP đã điều chỉnh trong shop khi gửi trình (AGC phải kiểm tra lại). vì những vấn đề này liên quan đến biện pháp cốp pha của agc. qhp chỉ thực hiện cho biện pháp thép. việc thi công các hạng mục Thép, Cốp Pha, M&E,… Vướng hay xung đột là chuyện bình thường trong thi công. vì thế không phải chỉ yêu cầu là 1 công việc thực hiện là thỏa mãn các yêu cầu. việc này BCHCT cần nhìn nhận lại từ nhiều vấn đề để tháo gỡ. việc yêu cầu QHP điều chỉnh tới chỉnh lui và né rất nhiều lần như BCHCT đã yêu cầu đến thời điểm đã gây ảnh hưởng rất nhiều đến tiến độ thực hiện của QHP và gây rất nhiều khó khăn khi thực hiện. vấn đề này yêu cầu BCHCT tìm giải pháp chứ không yêu cầu QHP điều chỉnh như hiện tại (rất nhiều lần)
- Thép đai lồng thép sẽ thực hiện gia công không hàn vào thép chủ ở những vị trí đặt la (chi tiết theo file điển hình đính kèm)→ vấn đề này liên quan đến cẫu lắp và chất lượng lồng thép khi vận chuyển và lắp đặt. không phải BCHCT thấy vướng 1 cái đai chỗ thép la cốp pha yêu cầu không hàn hay buộc kẽm,… nếu như thế không thẻ kiểm soát theo quy trình gia công điển hình và đã thống nhất khi thực hiện thép lồng cho dự án.
- QHP đề nghị BCHCT cần rà soát lại các vấn đề về biện pháp thi công của BCHCT để đưa ra các giải pháp xử lý, hiện tại đã thực hiện khá nhiều tầng và đậy là tầng điển hình, tránh yêu cầu lắc nhắc gây khó khan thực hiện của các nhà thầu bên dưới. Khi nào có sự thống nhất cuối cùng từ AGC về biện pháp thi công (xem phần nội dung trên đã nói) và liên quan đến thời gian thực hiện thì QHP sẽ kiểm tra có đồng ý hay không khi thực hiện.
- BCHCT cần lưu ý đây là vấn đề xung đột giữa các hạng mục khi thi công, không chỉ riêng phần hạng mục thi công thép.

Để thuận lợi hơn trong thi công, tránh ảnh hưởng đến tiến độ dự án, yêu cầu QHP thực hiện theo quy cách trên cho các lồng thép tiếp theo trước khi về công trường.

Các bộ phận liên quan chú ý cùng phối hợp thực hiện.

Trân trọng.

Results (English) 1:

At present, the reality of the school were difficult due to the cage of steel columns, walls, Elevator core entangled with the la of formwork. Disrupting the progress of the project. So BCH CT QHP requirements coordination support: -Steel steel cage home will make né la according to layout drawing (QHP has sent on 11/10/2016) → problem QHP has already adjusted in the shop when the sending process (AGC must check back). because these issues are related to measures of formwork of agc. qhp just made to measure steel. the construction of Formwork, Steel items, M & E, ... Entangled or conflict is normal in construction. so not only was the job done is to satisfy the request. This BCHCT need to look at getting back from many problems to disassembly. the required adjustment to adjust QHP retreat and escaped so many times as BCHCT has asked to have so much influence to accomplished QHP's progress and cause a lot of troubles when done. This problem requires finding solutions rather than BCHCT require adjustment as current QHP (many times) -Belt Steel steel cage will perform work not welded on steel in the place of a la (read more under typical file attachment) → issues related to installation and quality cẫu steel cage when shipping and installation. BCHCT not found entangled one steel belt la formwork required not required or welding zinc, ... If not the control card according to the typical machining processes and agreed when making steel for the project. -Suggested BCHCT QHP should review the problem of the construction measures of the BCHCT to give the solution, we at have made quite a lot of stories and cover is typical floor, avoid shaking requirements prompted hard causing khan performed by the contractor. When would be the ultimate unity from the AGC of construction measures (see section content on said) and related to the duration of the QHP will check whether or not when done.-BCHCT to note here is that the problem of conflict between items when executing, not just the category of construction steel. For more advantages in construction, to avoid affecting the progress of the project, asked QHP according to implementation on the steel cage for the next before about the school.The relevant parts of the same attention to coordination.Respectfully.

Results (English) 2:

Currently, the actual construction at the site were difficult due to the steel cage columns, walls, stairs entangled with cymbals core of aluminum formwork. Affect the progress of the project. So BCH CT requires coordination QHP support:
- Steel steel cage owners will implement né la according to layout drawings la (sent on June QHP 10/11/2016) → This issue has articles QHP correction in the shop when sending (AGC must check). because these issues related to measures of AGC formwork. qhp only made to measure steel. the categories Steel construction, formwork, M & E, ... Entangled or conflict is normal in construction. so not only is the first requirement of the implementation of the requirements is satisfied. this should be viewed BCHCT from many problems to solve. requiring adjustments to the tuning QHP back and dodged many times as BCHCT requested to date has affected a lot of the progress of implementation of QHP and cause a lot of difficulties in implementation. This problem requires BCHCT find solutions rather than requiring adjustment as current QHP (many times)
- Steel cage belt will perform machining of steel welded to steel not all in the placement la (details follow file typical attached) → problems related to formulation and quality steel cages during transport and installation. BCHCT not found entangled 1 spot steel belt requires no la formwork required for welding or zinc, ... if such cards are not controlled under typical processing procedures and agreed to implement the project for the steel cage.
- QHP BCHCT proposal to revise the issues of BCHCT construction methods to make treatment solutions, the present has done quite a lot of stories and this is typical floors, avoid shaking prompted require difficult performed by contractors below. When the final consensus from AGC in construction methods (see the content mentioned above) and related to the time taken to test QHP agree or not to implement.
- BCHCT to keep the problem here is the conflict between the construction item, not just the steel construction category.

for more advantages in construction, to avoid affecting the progress of the project, requirements specifications comply QHP steel cage on to the next prior to the construction site.

the relevant department notice jointly implemented.

Sincerely.

Results (English) 3:

At present, in the actual construction site encountered many difficulties, due to the steel column cage, wall, stair column in the middle of the core and the aluminum pull method. Affect the progress of the project requirements. So CT qhp BCH coordination support:Steel cage to be performed to avoid the master pull in the plane layout (to qhp pull to October 11, 2016) > this issue in the qhp adjust the sending program (AGC shop to check). Because these questions are related to measures AGC Jacob's law. Qhp only for the construction of the steel. This kind of steel after the target, the method, M and E, stuck or conflict is normal, in the construction. So is not the only requirement is that an implementation of the work is satisfied with the requirements. This needs to be removed from the multi angle bchct problem. Job requirements: qhp adjustment to adjust the time, avoid a lot of time to ask bchct has affected a lot of progress, leading to the implementation of qhp is difficult to implement. Bchct solution to this problem requires adjustment is not required for the current qhp (many times)The steel - steel cage to perform less than steel welding position, the boss pull (typical details in a file attachment) > this installation and quality related C U steel cage in the transportation and installation of bchct was not seen. A place called Jacob steel belt is not a mandatory requirement of welding or zinc. If there is no such typical control card processing program is executed, in a unified steel project.Qhp bchct - construction measures to check all the suggestions to solve the problems of bchct treatment, there has been a lot of layer and execution layer is typical, it is difficult to avoid shaking reminder request the contractor sakhan below. When at last, from the construction measures of AGC unified (part of said) and the related execution time, qhp check with the consent of the executive.- this is the bchct need to pay attention to the conflict between the problems, the construction project, not only part of the project construction of steel.In order to facilitate the construction, to avoid affecting the progress of the project requirements, in accordance with the qhp implementation method for the upper and lower bars of the cage at the public school.Parts related attention and coordination.Cherish.