五金件混色面积在0.08m㎡以内，或其长度在五金件某一方向（长、宽、直

五金件混色面积在0.08m㎡以内，或其长度在五金件某一方向（长、宽、直径或对角线）长度之1/10，宽度在0.05MM内，目视不明显，且同一面只有一处，可接受（AC），反之拒收（RE）。

Results (English) 1:

Hardware color within the area of 0.08m square meters, or the length of hardware in a certain direction (length, width, diameter or diagonal) length 1/10, width 0.05MM, visually inconspicuous, and the same in only one place, acceptance (AC), whereas rejection (RE).

Results (English) 2:

Hardware mixing area within 0.08m㎡, or the length of the hardware in a certain direction (length, width, diameter or diagonal) 1/10 length, width, within 0.05MM, visually obvious, and the same side Only an acceptable (AC), and vice versa reject (RE).

Results (English) 3:

Hardware color mixing in the area less than 0.08m square meters, or its length in the 1 / 10 of hardware in a certain direction length (length, width, diameter or diagonal), width within 0.05mm, visual is not obvious, and same side in only one place, accepted (AC), otherwise reject (RE).