三本PHP 林 様 毎度おせわさまです。 本件、量産品質の継続的安定化

三本PHP 林 様


毎度おせわさまです。

本件、量産品質の継続的安定化に向けた、量産監視手順について以下にご案内いたします。


■目的：個々の受入検査では規格内であるが、時系列傾向を見た場合に変化認められる部品に対して
変化を察知し、予防措置的対応を行うため、定期的な監視を実施する

■対象：イヤホン/ヘッドホン用コード


■監視方法：添付案内書の手順に基づき、3ヶ月に1回、下記の試験を実施

①コード屈曲試験
②コード硬貨試験


■報告方法：添付報告書書式に試験結果を記入して、根本、中野宛に送付してください


※その他、ご不明な点がありましたら、お問い合わせください。

Results (English) 1:

Three forest like PHP Is outside every time. Continuous production quality, this case will guide the following instructions for the stabilization of the production monitoring. ♦ objectives: for parts when looking at temporal trends in the acceptance of the individual within the standards, but admitted changes To conduct regular monitoring to detect changes and the prevention measures for ♦ target: Earphone/Headphone cord ♦ monitoring: once every 3 months, to examine the following, based on the procedure in attachment Guide (1) code bending test (2) examination of code coin ♦ reporting methods: describe the test results on the attached report format, please send to the Foundation, addressed to the Nakano * If you have any other questions, please contact.

Results (English) 2:

Three PHP Hayashi like


is every time care clients.

This matter, for the continued stabilization of the production quality, following the will guide you about the mass production monitoring procedures.


■ Purpose: Although the individual acceptance inspection is within the standard, when for the parts to be recognized change when viewed in the series tend
to perceive the change, in order to carry out preventive measures responses, conduct regular monitoring

■ target: earphone / headphone cord


■ monitoring method: based on the procedure of the accompanying brochure, once in three months, the tests of the following

① code bending test
② code coin test ■ reporting method: the test results in the attached report form to fill out, root, please send it to Nakano ※ other, if you have any questions, please contact us.

Results (English) 3:

Three PHP Mr. HayashiYou always being busy.For this case, the stabilization of production quality in the production process, continuous monitoring information will be described in the following.Objective: "individual incoming inspection spec. the components change observed time series trendSensing the change, in order to carry out corresponding preventive measures, conduct regular monitoringObjective: headphone / earphone cordMethods: on the basis of the monitoring / attachment procedures, 3 months, the following testI bent test codeTest whether the coin codeMethods: a report of the test results, to fill in the attached report form, please send to* if you have any other point, questions, please contact us.