ACU2从新板到可使用过程1 新板安装版本给新板安装版本，这个要从新板

ACU2从新板到可使用过程
1 新板安装版本
给新板安装版本，这个要从新板总是不停的重启开始说起。
一般正常发货渠道采购的新板，都会预装版本，这样ACU2开机启动后，使用串口设置IP，telnet参数等等步骤。但是，也会有没有装版本的新板！使用串口插上去，会看到它一直在不停的重启，这个情况就是没有预装版本。
装版本，需要先把版本上传到ACU2flash中，当它下次重启的时候，就可以通过它来启动了。
1.1 上传版本到ACU2
上传版本到ACU2可以通过串口上传，串口的最快速度是115200，用它来传输版本的话需要四个小时左右，严重影响效率。所以，可以使用以太网口进行版本的传输。
步骤1：
设置TFTP服务器，并设置串口参数，通过串口登录设备。
重新启动设备。
当设备上电后，与设备搭建配置环境的PC机或配置终端屏幕上显示如下。

Results (English) 1:

ACU2 new panels to be used1 new board installed versionFor new installations, this will start on a new plate keeps restarting to start.Normal shipping channels to purchase new plates will be pre-installed version so the ACU2 after boot, using serial set IP,telnet parameters and steps. However, there will be no new board installed version! Using serial plug in, you will see it continue restart, this situation is not a pre-installed version.Installed version, you need to first upload version in ACU2flash, when it comes to the next restart, you can use it to boot.Upload version 1.1 to ACU2ACU2 uploaded version can be uploaded through the serial port, serial port is 115200 the fastest speed, use it to version takes about four hours, seriously affecting the efficiency. So, you can use the version of Ethernet transmission.Step 1:Set up a TFTP server, and set the serial port parameters to log into the device through the serial port.Restart the device.When a device is after power, and build configuration PC machines or equipment configuration on the terminal screen is shown below.

Results (English) 3:

ACU2 from the new board to use
1 the new process plate installed version installed version to the new plate
, this from the new board always restart to start.
new plate normal distribution procurement, will be pre installed version, so the ACU2 boot after using the serial port settings, IP, telnet parameters and so on steps. However, the new board will also have installed version of! The use of serial port plug, will see it has been the resumption of non-stop, this situation is not preinstalled version.
installed version, to the first version is uploaded to the ACU2flash, when it next reboot, you can through it to start. Upload
1.1 version to ACU2
Upload upload version to ACU2 through the serial port, serial port 115200 is the fastest speed, it is used to transmit the version it requires about four hours, seriously affecting the efficiency. So, you can use the Ethernet version of transmission.
step 1:
set up a TFTP server, and set the serial parameters, through the serial port logging equipment.
reboot the device. When the device is powered on, the following and display equipment configuration environment PC machine or configure the terminal screen.