The experimental response is plotte

The experimental response is plotted without the initial R-phase shown in Figure 4b because it is assumed that this portion of response will already be expended as the rod is pretensioned to an initial stress above the R-phase plateau. It is shown that the model is capable of approximately simulating the unloading path and residual stresses upon unloading.

Results (Chinese Traditional) 1:

沒有初始的 R 三相圖 4b 中所示，因為它假定已將花費這部分的反應，如杆先張法預應力與初始應力水準以上研發階段高原，繪製出實驗回應。結果表明該模型能夠近似地類比的卸荷路徑和卸載後的殘餘應力。

Results (Chinese Traditional) 2:

實驗響應繪製，而不因為假定響應的這個部分將已經消耗的棒預緊到R相高原以上的初始應力在圖4b中所示的初始R相。它表明，該模型能夠大致模擬後卸卸載路徑和殘餘應力。

Results (Chinese Traditional) 3:

實驗反應繪製無圖4b所示的初始R是因為它認為這部分的反應已經擴展為杆預應力的初始應力比R高原。它表明，該模型是能够類比卸載路徑和卸載殘餘應力。